2/21/2020
Outagamie Speedway
Track Safety Inspections
Safety Inspections will be available starting on the first Test & Tune, which is open to any division, on Saturday, April 25th. All drivers planning to run Outagamie Speedway in 2020 must have a safety inspection completed before they will be allowed to compete.
The safety rules APPLY AT ALL TIMES THE CAR IS ON THE TRACK, including track packing.
*Snellrated SA2010 or SA2015 helmet required.
*Roll bar padding required in driver compartment. (Recommended: Fire retardant padding.)
*SFI-approved full fire suit required. Fire retardant gloves, shoes and neck brace (or head and neck restraint) required. Right and left seat head supports required if using head and neck restraint system. (Recommended: Fire retardant head sock and underwear, collapsible steering shaft.
*Driver-side window net required, minimum 16 inch by 20 inch ribbon or mesh style, and must be mounted to roll cage so latch is at top front of window. Maximum four inch tall visor attached to window net.
*Minimum two inch wide SFI-approved five point safety belt assembly required, must be mounted securely to main roll cage. (Recommended: Safety belts no more than two years old.)
*Kill switch required within easy reach of driver and must be clearly marked
‘OFF’ and ‘ON’.
Thanks
J
Article Credit: Outagamie Speedway